Pro Grade Force 5

80dB Cellular/75dB PCS | Boost signal buildings up to 80,000 sq. ft. and 100+ users

High Output Industrial Grade Cellular Voice and Data System

System material and design starting at $2900.00 CAD

Powerful Premium High Power 15 Watts high output industrial grade system.

Industrial building systems for LARGE indoor coverage areas with multiple cell phone users, such as offices, underground parking lots, metal warehouses, etc.

This system also has a large amount of output power, for multiple indoor antennas and long shielded cable runs between antennas, in DAS or repeater system set ups.

This HIGH OUTPUT INDUSTRIAL GRADE system is comparable to carrier grade repeaters and is used in many commercial and government applications across Canada.

• Very high gain (dB) and Very high output power (dBm) both for the uplink and downlink.

• A total of 15 Watts total output power for the uplink (throw to the local cell carrier’s towers)

• 15 Watts total for the downlink (for coverage signal push in the building and extra branches) with a very high 80dB gain for all frequencies.

• Each cellular frequency band can be controlled separately for exact calibration to the local towers, as per RF noise under Industry Canada rules and regulations

• System design is included with the system price

Uplink Frequency Range (MHz): 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included)
Downlink Frequency Range (MHz): 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included)
Supported Standards: CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards
Input/Output Impedance: 50 Ohm
Maximum Gain: 80 dB
Max Uplink Power: 17 dBm
Noise Figure: 5 dB
VSWR: ≤2.0
AC Input / Output: Input AC 110 V, 60 Hz / Output DC 19 V
Maximum Output Power: 3 Watt EIRP
Cable: SC-400
RF Connectors: N Female (both ends)
Power Consumption: <65W
Operation Temperature: -4º F to +158º F
Dimensions: 14.5″ x 11″ x 3.5″
Weight: 26.5 lbs
Note: Our boosters and amplifiers cannot transmit cell signals without an outside and inside antenna connected by a cable. We strongly recommend these antennas and cables as accessories for our boosters and amplifiers. However, the number of antennas, length of cable, or connectors needed can vary according to the size and make of the structure, lack of signal strength, or where the structure resides. Or you can contact us or our reseller to find out what you need.

Yagi

SC-230W

Full Band Outside YAGI Antenna

CM222W

Full Band Inside Dome Antenna

SC-400

Ultra-Low-Loss Coaxial Cable

SC-WS(Option)

Full Band 2,3 or 4 Way Splitters